Application |
Target |
Recommended product |
Features |
Remarks |
Auto./
manual |
Class and thickness of the base metal |
Quality |
Material cost |
Productivity |
Automatic |
All metals, thicker than 0.8T
|
Middle/high |
Low |
High |
MAGIC ARC II |
Minimization of the spatter
|
Using the MAG gas to reduce the spatter of the steel
|
All metals, thicker than 0.8T
|
High |
Middle |
High |
MAGIC PULSE |
Thin plate, galvanized plate/heat deformation is small
|
|
Nonferrous metals, thicker than 0.5T
|
High |
High |
Low |
DC, AC/DC TIG |
|
Utilizing fillercon when using the filler metal
|
All metals (except the Al), thicker than 0.02T
|
Highest |
Middle |
Middle |
|
High density precision welding, possible to weld ultra thin plate
|
Utilizing fillercon when using the filler metal
|
|
High |
High |
High |
MAGIC PULSE |
Prevention of the distortion phenomenon and the tip melting
|
Built-in hot start function and the pulse function
|
Manual |
|
Middle/high |
Low |
High |
MAGIC ARC I |
Minimization of the spatter
|
Using the MAG gas to reduce the spatter of the steel
|
Stainless steel & nonferrous metal, thicker than 0.5T
|
High |
High |
Low
|
DC. AC/DC TIG |
|
Utilizing fillercon when using the filler metal
|
All metals (except the Al), thicker than 0.1T
|
Highest |
Middle |
Middle |
|
High density precision welding
|
Utilizing fillercon when using the filler metal
|
Al, thicker than 1T |
High |
High |
High |
MAGIC PULSE |
Prevention of the distortion phenomenon and the tip melting
|
Built-in hot start function and the pulse function
|
VALUE PROPOSITION
